Pirie Enterprises
<
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
Click for page
 

Automatic openers >> Sliding gates

For Sliding Gate Automatic Openers we mainly use FADINI sliding gate openers which are Italian made and of a particularly high quality while remaining reasonably priced Our other favourite is Australian made ATA which is better priced and has the advantage of local support and quicker turnaround times.

A Sliding gate slides sideways away from view usually behind a fence.
An Automatic operator makes opening and closing the door a push button affair and no longer the hassle it used to be when it had to be opened manually. Please look through the Fadini and ATA product range (below) which cater for different applications from residential to commercial.

Nyota 115 sliding  gate operator unit
Fadini Nyota 115 (click to see in situ)
Nyota 115
Fadini's Nyota 115 (left) for sliding gates.
Nyota 115 NYOTA 115, an electro-mechanical operator, has been designed so that it can suit any structure of sliding gates. Its design, compact and stilysh, allows to enclose in its inside all accident prevention devices in conformity with UNI 8612 regulations, i.e.: steady lock braking action in stop position - manual selfcontrolled emergency release - switch under the housing to cut off operative logic circuit - line switch incorporated in the control box - built in end stop limit switches operated by normally closed mechanical contact.
Fadini the Gate Opener
MEC 200
MEC 200 Swing gate operator
(Click to see in situ)

MEC 200
The Fadini MEC 200 (pictured left) for sliding gates
MEC 200's, electromechanical equipment, both vertical and horizontal, have been designed to be installed on any gates, even of considerable dimensions, as they can stand very well settling and expansion effects that gates usually undergo. They are made of die cast aluminium and have a large cover that can house a programmer in a proper seat. The programmer transmits the commands of the logics and performs either automatically or semiautomatically and is connected to devices that avoid running over and crushing, as required in conformity with UNI 8612 safety regulations.
Fadini the Gate Opener
Girri 130 Sliding Gate operator
Girri 130 Sliding gate operator
Click to see unit in place.
FADINI GIRRI 130 GIRRI 130 is an electro-mechanical operator designed to be installed to medium size sliding gates up to 400 Kg of weight. It is compact to take up as little room as possible, made of pressure cast aluminium, fitted with a fixing base plate to firmly anchor the operator to the ground, suitable holes are provided in the plate to allow the electric command cables and the mains to go through. The electric motor and the gear worm are in vertical position; the shaft is coupled to the cog which is fitted outside the cover; the shape of the cover with rounded corners and suitable slots to provide aeration to the motor/gear assembly makes the unit very compact and pleasing to the eye.
Girri 130
Fadini the Gate Opener
ATA Easy slider unit
ATA EasySlider Sliding gate operator
ATA EasySlider sliding gate operator (left)
ATA gate openers do not utilize wipers motor for such a specialized application as gate automation. In fact, ATA have invested thousands of hours in designing the optimum drive motor for gate automation focusing on power and performance. Each motor is coupled with an ATA purpose built and designed gear system to ensure optimally matched drive output for both the Elite swing gate openers and EasySlider sliding gate openers

Pirie Enterprises
Copyright 2007 All rights reserved

Homepage About Pirie Enterprises Products Manufacturing Pirie Contacts
Homepage About Pirie Enterprises Products Pirie Contacts